KP servo electric hydraulic...
 KP energy saving system
 KP60G General inverter
 KP90G elevator inverter
 KP200 controller
 KP80G controller
 KP-60G X cutting inverter
 KP-BR controller
 KP Special servo drive
 KP Permanent magnet servo
Asynchronous servo inverter
KP escalator controller
 Japan Sumitomo pump
 KP Lathe special inverter
Lathe Servo
Energy Japan
More>>  
 KP90G parameters
 KP60G parameters



Dedicated servo injection molding machine drive
 
Introduction:
 For energy-saving injection molding machine,servo has a closed-loop feedback control system, fast dynamic response,high control precision.Servo is the advanced stage in the development of inverter to inverter,servo is the mother of. The innovation advantages of asynchronous servo,clever fusion of frequency conversion energy saving technology and synchronous servo energy-saving technology,and also overcomes the shortcomings of their own,in the basis of improving injection molding machine production efficiency, good power saving effect,and has the absolute price advantage.After quantitative pump injection molding machine supporting asynchronous servo,with new competitive power,to the entire industry,subversive significance.

Function characteristics：
  Current and voltage control technology is excellent,accelerated by the 0.1S command,drive stability without tripping operation.
  The output torque of a wide range:pressure and flow in the stable torque output of the motor set range,to ensure the quality of workpiece.
  Green output:the power module of advanced driving mode,can not generate interference on the control circuit and the sensor of injection molding machine.
  The process has the curve function of memory,the user need not change the energy saving system parameters in the replacement of the mold.

Specifications:
 Mode-locked(T)
Flow(L/min)
 Pressure
(kgt/cm)
emissions(ml/r)
Maximum speed(r/min)
Motor model
Drive model
50
50
14
25
2000
U1004F 15.3
TS-I-4T024
80
61
14
32
2000
U1005F 15.3
TS-I-4T030
160
100
14
50
2000
U1006F 17.3
TS-I-4T039

Parameters:
V5?IS-4T□□□G
Three phase 400V constant torque/heavy duty applications
Power（kW）
11
15
18.5
22
30
37
45
55
75

Output

 Voltage（V）
The 3 phase of the rated input voltage
Rated current（A）
24
30
39
45
60
75
91
112
150
Overload capacity
150%?1min,180%?10sec.,200%?0.5sec.,An interval of 10 minutes (inverse time characteristic)
Input Rated voltage/frequency
3 phase 380V～480V;50Hz/60Hz
Voltage range
323V～528V;Voltage unbalance:≤3%;Allowed frequency wave:±5%
Rated current（A）
39
50.3
60
69.3
86
104
124
150
201
Brake unit
Standard built
Optional built-in
Protection grade/cooling mode
IP20/Forced air cooling

Model:
Voltage grade
Drive model
Appearance and installation dimensions（MM）
weight(kg)
W
H
D
W1
H1
D1
T1
hole
TS-I-4T024

210

337

200

150

324

88
2
7
8.5
TS-I-4T030
TS-I-4T039 289 440 215 200 425 88 2.5 7 17
TS-I-4T045
TS-I-4T060
TS-I-4T075
319
575
212
220
553
90.5
2.5
10
25
TS-I-4T091
TS-I-4T112
404
615
255
270
590
86.5
3.0
10
35
TS-I-4T150

Copyright 2018 KEPU GROUP. All Rights Reserved   
Address: KEPU Yinzhou industrial Zone, Yinzhou County, Ningbo, Zhejiang Province, China 315040    
Tel:+86 0574 8823 3677　 Fax:+86 0574 8823 9359   E-mail:twz2005108@163.com